Factors that Cause the Refrigerator Compressor to Overheat

The role of the refrigerator is to keep your food cold, but when the compressor is hot, it defeats the purpose. A refrigerator is like an engine. It comes with parts that should work together so that it runs smoothly. If a part of the refrigerator does not work properly, it can cause problems with other parts. The same goes for a compressor.

When your refrigerator compressor starts to overheat, the appliance turns into a ticking time bomb. It poses a fire risk, but if it is in this state, it consumes more energy than usual, which results in higher utility bills. You can call commercial refrigerator services if the issue worsens. Learn more about it now.

Low Internal Temperature

One common household mistake is to set the temperature of your refrigerator too low. When you set the temperature lower compared to what is recommended, it can cause the compressor to overheat and fail. This can cost you time and money. Setting the refrigerator temperature lower compared to 35 degrees F, the compressor is going to work harder, making it overheat quickly.

Modern refrigerators overheat if you do not correctly set the temperatures outside. If you prevent the refrigerator from overheating, you need to check the temperature setting on the control panel and make sure to set it between 37 to 38 degrees F.

Poor Ventilation

Fridges release hot air while it keeps the inside compartments cool. Actually, condenser coils are good at getting rid of hot air that has been generated while compressors and other components are functioning. However, if hot air is unable to escape, the compressor will overheat naturally, leading to performance issues.

Hot air from coils can become obstructed when you have objects close to your fridge. Therefore, make sure to keep the space at the back of your fridge so the hot air can escape properly.

The Fridge is on the Sunny Side

Sometimes, refrigerators are placed in a location that has too much sunlight.

This kind of placement causes you to see a fridge that overheats under hot weather. If this happens, there are two reasons why your compressor is hot.

The sunlight could directly heat the compressor. Or, since direct sunlight is heating the fridge, the compressor should work harder so it cools down.

Not Enough Refrigerant

If the refrigerator is running loudly or is working harder than normal, the culprit is low-level refrigerant. This is a common problem in older refrigerators and can cause different problems.

The main cooling system of a refrigerator utilizes refrigerant to circulate around a closed loop. The refrigerant receives pressure from the compressor and it circulates through the closed loop. When this happens, your refrigerator stays cool.

There needs to be enough refrigerant in the system. When your system is undercharged or too hot, it can cause problems.

Condenser Fan is Broken

The condenser in your fridge will eliminate heat that is generated by components. Naturally, if the fan broke down, the appliance’s internal temperature substantially rises which leads to overheating of not only the compressor but all other components as well. Therefore, when this happens, it is natural for the compressor to fail. If there are expert technicians that can repair the fridge, you will not have an issue.

The condenser fan will be replaced after inspecting the damages that were done to the compressor. If the damage is not very serious, they are going to repair them to make the fridge functional again.

You can contact ice cream freezer repair Springfield anytime you need the compressor to be fixed.



Freezer is Working but Not the Fridge

There is nothing more frustrating for a homeowner than when the freezer is working but the fridge is not. It is worthing reasoning out that if the freezer is cold, the refrigerator should be as well. However, sometimes it is not happening.

When it comes to refrigerators and freezers, they both have a couple of complex mechanical parts and electric components as well. A couple of reasons why your fridge is not cooling but the freezer works can easily be solved by any homeowner. There are a couple of issues however that are left for professional technicians to do.

Before calling the walk in cooler repair, you should read this article.

The Thermistor is Failing

One common reason why the refrigerator is not cooling is because of a faulty thermistor. The thermistor is going to monitor your refrigerator’s internal temperature. When the interior is detected to be excessively warm, it will signal the compressor to activate and begin cooling.

In case the thermistor refuses to work, the appliance cannot monitor its own temperature, so the coils and fan will never switch on, in case the temperature increases, or they will never switch off. If the fridge is going to be very noisy, and if it will ice up or freeze your food.

You Could be Overpacking Your Freezer

One common issue that homeowners are unaware of is a freezer that is overpacked. Most homeowners feel that it stands to reason that if the freezer has no room, you just shove it in there.

The problem with doing this is that the freezer will contain vents that allow cold air to flow. In case these vents are blocked by too many items, that will limit the airflow that goes in your refrigerator. For instance, the freezer would be okay but the refrigerator is too warm.

Stuck Damper Control

One reason why this problem could be happening is that the damper control assembly is stuck. The damper control assembly is found between the freezer and fridge components. It regulates how much cool air is flowing from one compartment to another. If the damper control is stuck closed, it will not let enough cold air into the fridge, which causes the temperature to go inside to rise. If you want to fix this issue, place your hand in front of the vent to check for airflow. If you do not feel an airflow, you might have to call a professional to repair the damper.

Evaporator Fan is Faulty

The evaporator fan is responsible for pulling cold into the coils, where it is distributed using the fridge and freezer. In case the fan is malfunctioning, this does not happen efficiently. The most common issue with the fan is the motor.

Most of the time, a faulty evaporator fan is because of inefficiencies or faults in other parts of the appliance. During these circumstances, the evaporator fan motor should work harder to compensate, which increases the likelihood of breaking down and shortening the lifespan.

Condenser Coil is Dirty

In general, you can find condenser coils at the back or bottom of the fridge. You should consult the owner’s manual to make sure. After locating them, you can check to see if your condenser coils are dirty. If this happens, you need to unplug the refrigerator and use a small attachment to clear them. After that, use a coil cleaning solution and water for cleaning. You need to dry the coils using a clean cloth and then plug the fridge again.

You can call commercial refrigerator repairs Alexandria anytime to get it fixed.





Signs Your Deep Fryer Needs to be Replaced

Deep fryers are stapled in the majority of commercial kitchens, but there can malfunction from time to time. That is why it is significant to understand some common problems you could encounter when you own even the highest quality deep fryers. Even if most commercial deep fryers are popular for their efficiency and durability, these kitchen appliances are heavy-duty. They can come across a couple of minor issues within their lifespan. Luckily, the common issues that come with a deep fryer repair can easily be fixed and maintained without spending too much.

You can contact commercial appliances repair anytime if you want to try repairing your deep fryer first before buying.

Thermostat is Broken

Deep fryer manufacturers include a thermostat so you can control the equipment’s operating heat. Therefore, the oil temperature cannot lower or raise excessively. When there is a broken thermostat, your deep fryer cannot adjust the heating element properly. The oil can be too cold or too hot, which causes food to burn or undercook.

A deep fryer that overheats can burn oil to combustion, which leads to a fire outbreak. Therefore, if employees inform you about a broken thermostat or problems with the oil temperature, you should contact professionals to immediately service your machines. The specialist is going to change the thermostat and test the equipment to tell if there is an underlying issue.

Burners are Blocked

Grease buildup, dust, food particles, and debris clogs burner orifices. Burners that refuse to light up at all or only partially or irregularly could have blocked orifices.

In order to unblock clogged burners, you should use a stiff brush over the burners to take out particles or debris that are jamming the orifices. In case the burners produce fluctuating flames after brushing them, the problem could be because of inconsistent or low gas pressure. If the fuel supply is enough, damaged fuel lines could be the reason why fryer burners refuse to ignite.

You should not try to fix fuel lines on your own. You should ask the technician to assess the fryer for potential problems with the supply lines of the fuel.

Faulty Pilot Light

When there is no pilot light, it is normally a sign that the deep fryer is totally out of commission. If you do not have it, the oil is not going to heat up at the right temperature. Even if there are a lot of reasons that could cause a faulty pilot light, the common culprit is the gas supply valve. The best way to confirm that this is the issue is to examine supply lines for any blockage. In case the valve is clog-free and open, it might be time to replace the thermopile. The main heating element is the thermopile, which converts thermal heat into electric energy, and signals the pilot light to ignite the flame. Even if the thermopile is quite easy to replace, you should contact a professional to make sure that the repair is done correctly.

Oil Filter is Broken

Normally, deep fryers collect plenty of food debris, which affects food quality. The good thing is that they have an oil filter that takes out the debris to keep the oil clean. This will allow oil to circulate in the equipment with no difficulties.

When there is a damaged oil filter, the oil is going to be dirty, and it cannot effectively circulate. This is going to result in food not cooking well.

You can check commercial dishwasher repairs Fairfax anytime you need to because you need professionals fix your equipment.  




Signs Your Walk-in Cooler is Malfunctioning

If your walk-in cooler is malfunctioning, it can be disastrous because your business cannot function properly. Repair prices of commercial storage can be expensive. However, an inexpensive and quick walk-in cooler repair saves your equipment from expensive repairs or replacements. It would be ideal to contact a walk-in cooler repair company to rectify the issue right away so you will not experience any disturbance and have peace of mind.

A food industry business is among the most lucrative businesses, but you have to keep products fresh all the time. Walk-in cooler repairs can break down, but unfortunately, it is hard to detect any signs of malfunction if you are unaware. You can learn more about these signs right now:

Ice Buildup

While it might seem natural to have ice in a walk-in cooler, it is an indication of failure. Freezers and refrigerators should not cause ice buildup on the unit or food. When there is ice buildup, there is a chance that the evaporator is starting to fail; since the unit is supposed to prevent ice buildups by breaking them apart and keeping the system smoothly running.

Temperatures are Fluctuating

Walk-in coolers should maintain a consistent temperature so that your inventory stays intact. Most of the time, temperature fluctuations are the product of a malfunctioning sensor, so you must make sure that the cooler doors are not propped open for longer periods. Otherwise, warm air may enter the unit causing it to work harder than it has to.

Door Wear and Tear

You should examine the seals on the walk-in cooler doors for wearing and deterioration. This damage can be costly because of seepage, which requires your cooler or freezer to continuously operate so the temperature can be maintained.

There are Bad Smells

If you have a malfunctioning walk-in cooler, there is a possibility that you will notice weird smells from the unit. These smells occur in different ways. The freezer coolant might be old and it is starting to lose effectiveness. The worse thing is that the food inside your fridge could be rotting or getting destroyed by different elements. It is never a good sign if there are bad smells coming from the walk-in cooler.

Leaking Water

Walk-in coolers normally have seals and insulation. If these are old and faulty, they can cause your walk-in cooler to leak. This is something that you need to rectify right away since water leaks can cause mold and mildew growth in the cooler.

Strange Noise

If there is a strange noise or you see flickering lights, you should contact a professional right away to check it out. This can lead to electrical problems that may cause danger to your manpower and your entire facility.  

There is a Stale Odor

If the cooler coolant leaks, you might detect an odor inside/ or around the walk-in cooler. Since these leaks can more likely happen if you have an old or obsolete cooler, you might need to consider upgrading your walk-in cooler. You might also have to contact a walk-in cooler repair to make sure it is always up and running.


If there is a buzzing noise, you should not assume that it is caused by the dispensing of water. The ice maker is going to make a buzzing sound when it is attempting to fill the water. If you hear a buzzing noise every 15 minutes, you must check to make sure the water is turned on so the ice maker can function properly without any issues.

You can contact commercial kitchen appliance repair Alexandria anytime if you need to have your walk-in cooler repaired.



How to Stop Mold Growth in the Refrigerator

Refrigerators are great for keeping frozen foods cold and they should still be good once you are ready to eat them. However, most frozen foods are perishable. They can also go bad, and they can spoil if you do not use them or you have forgotten them.

Freezer mold and burn can accumulate on the inside of your refrigerator or freezer in case they are not cleaned. Ice also forms on freezer walls if you set the temperature to be too cold for a long time. This can harm the foods inside the unit and causes damage to the appliance.

If you want to contact commercial refrigerator services for repairs, go ahead. Read on to know more.

Regular Cleaning

It is important to clean your refrigerator regularly using warm water. Today, cleaning solutions are sold by the company, which are safe for food. Cleaning solutions provided by companies are recommended by soap solutions. Traditionally, baking soda is recommended for cleaning refrigerators. As you clean, remember to take out racks, and removable drawer parts. While cleaning, dry all parts using a soft cloth.

Proper Food Storage

Fruits and vegetables require the most storage with mold growth in the fridge and they must be always kept dry and fresh.

If you want to store them inside the fridge, you should not because they attract mold, and if they are left in packets or containers that they were bought in because there is already moisture.

The Interior Should be Dry

Mold loves moisture and if they cannot find it, it will not grow.

Naturally, the fridge is cool and moist which means removing the moisture would almost be impossible, but that does not mean you should not do your best to keep the interior dry.

Take a paper towel to wipe down all the shelves and compartments regularly, while taking care of spills or condensation that leads to mold growth.

Inspect the Contents Regularly

Take some time once a week or two to look at the contents of your fridge. This will include going all the way in the back to locate items that you might have overlooked. If it has been there a long time or you cannot remember how long it has been there, you should throw it away. Check the food inside your refrigerator if there are any signs of spoilage or mold. This contaminates other foods around them if they have been left there for too long.

Keep it Airtight

Keeping the food and vegetable air-tight inside the refrigerator is important. You are able to store food in air-tight containers and vegetables inside zip pouches or tied covers. Removing air from the vacuum seal helps foods like garlic and cheese to stay fresh and free from molds.

Fridge Repairs and Maintenance

Sometimes, mold can spread or grow faster because of an issue with the fridge.

You should do a regular check on the fridge so you can make sure that none of them is leaking and that all seals are working since both lead to mold. Take care of any repairs that should be done urgently.

Store Dairy Properly

It would be great if you store wrapped cheeses at the back or in drawers. You must keep dairy-based foods on the main shelves instead of door shelves. Door shelves are sensitive to different temperatures, which could compromise the quality of dairy foods that are stored on them, so make sure to avoid that.

You can talk to ice cream freezer repair Northern VA if you need to have your commercial refrigerator repaired.



Signs the Ice Maker Needs a Repair

These days, it is uncommon if you do not want a refreshing and cold beverage when the day ends. However, this requires that your refrigerator’s ice maker is working properly so that you have a constant supply of ice. Occasionally, the ice maker might not be working right and it should be repaired, but what are the signs?

You can easily call an ice dispenser repair service, but you should also be able to tell if you can do it on your own or you can be sure that you are not being fooled. When you read this article until the end, you will learn more about the signs that your ice maker should be repaired. Read on.

The Ice Does Not Taste Right

If you notice that the ice has a different taste and smell, you should check the ice maker because it can get damaged. Sometimes, you might want to assume that the water is dirty, but that might not be helpful until you inspect and repair the ice maker. The drinking juice that has a foul smell is devastating, regardless of how delicious the taste is.

Loud Noises from the Ice Maker

Hearing your ice maker make loud noises can be an indicator of whether or not it should be repaired or not. Ice makers can be loud once they start dumping ice, but they tend to be silent most of the time. If the ice maker is producing loud or unusual noises, then it is most likely caused by a mechanical issue that needs repair. Generally, listening to the noises appliances make helps you determine their condition.

Ice Cubes are Half Frozen

Do you notice that the ice cubes are not completely freezing? You can have an issue with the compressor, and the part in the ice machine is partly to be blamed for controlling an internal temperature. When the compressor starts to malfunction, the ice machine heat uncontrollably rises, and you will end up with slush and not cubes.

Fails to Produce Ice

If the ice maker is not producing ice, you should have it repaired. You might want to assume that your ice maker is dead, but that is not always the case. The machine stops producing ice because of a technical fault that needs to be repaired. It can be a water line blockage or another technical issue that can be repaired.

There are Leaks

One of the most obvious indications that the ice maker is broken is leaks. When the leak forms on the exterior of the ice maker, there are water pool puddles under the ice maker. If you do not address it right away, an exterior leak causes damage to the baseboards or floorboards. The exterior leak can show itself in a larger-than-average ice cube. It could seem like a huge deal but the larger cubes cause rapid wear and tear on the ice maker.

The Freezer is Too Warm

This issue is among the easiest to check so you can see if your ice maker is turned on, and you can start with this. In case the freezer is too warm, you could think that you will notice the food defrosting, but that is untrue. If the freezer is more than 10 degrees F, the food will still be frozen, but the ice maker struggles to make ice. It might even stop making ice altogether because of this temperature.

If you think that a warm freezer could be the cause, you want the temperature to be 0 degrees F.

You can talk to commercial ice maker repairs Fairfax anytime.



How to Choose a Commercial Dishwasher

There is no doubt that if you are planning to enter the food service industry, then you are also in the business of dishwashing. Silverware, dishes, glassware, and everything else that is important for preparing food should be sanitized and sparkling clean. Therefore, once you are in the market for a new dishwashing system, it is important to research the different kinds of available models.

Everyone who has gone to a restaurant, café, or bar is likely to have experienced disappointment and anger when their meal is served on a dirty plate. If you do not want to pay for commercial dishwasher repairs and would rather purchase a new one, here is a guide to help you choose the right one.

Consider the Costs

High-temperature dishwashers normally cost more at first and it can slightly impact utility bills because of the energy required to heat the water. Low-temperature models can come at a lower price, but the chemicals required for the sanitation process should be purchased continuously. Low-temperature machines also use more water compared to high-temperature versions, which can be part of the overall investment. Considerable pre-scrapping is needed with the low temp models if you do not want to re-wash.

Remember that since the high-temperature dishwashers require a vent hood to handle the steam, the machine’s location should be planned carefully. Even if the steam of high-temperature machines goes through the hood, it is a great idea to make sure that the dishwasher is placed far from the customer area.

Capacity and Size

Size and capacity should be allotted enough weight in your cost. It does not make sense to purchase a commercial dishwasher that you cannot fit into the space you have. Before you start browsing options, you need to measure your space.

Normally, commercial kitchens are busy, crowded places with a lot of people. Aside from the practical concern of whether you have enough space for the dishwasher, you must also consider if where you are placing it is in anyone’s way. Is it possible for people to continue with their jobs efficiently with the allotted spot for the dishwasher?

The size of the dishwasher normally dictates how many dishes can be inside at a time. In case it is unable to wash enough dishes all at once, your customers have to deal with wait times that are longer.

Hidden Benefits

Both high and low-temperature dishwashers come with advantages that you do not always see at first. The high-temperature one dries dishes really quickly after they are taken out of the washer, which means you can put back the items into service faster. This is helpful when the kitchen is busy. When it comes to the low-temperature washers, they are normally available in the form of standard electrical service. This is an advantage for operations where electrical service does not have enough to power up a high-temperature washer. Low temperature, chemical machines are best for applications where lighter soils are dominant.

Ease of Operation

The good thing is, that commercial dishwashers have efficient, one-button or two-step controls making them easy to use. Simple operation is an important consideration for busy kitchens where duties are normally shared and everyone pitches in to make sure it is running smoothly in the kitchen.

Even if it is simple to use, consideration must always be given to the kind of dishwasher you buy before washing. The loading and even wash cycles at the end of the day to make sure that your machine keeps performing excellently.

You can check out commercial kitchen appliance repair Northern VA if you need to have it fixed in the future.



Signs Your Commercial Deep Fryer Should be Repaired

Commercial deep fryers are for preparing a huge variety of foods. There are different kinds of deep fryers, and the one you choose depends on what you need and the power source you want. Since deep dryers are often used, they can have problems over time, which reduces efficiency.

It is important to know the early signs that you need a deep fryer repair so that you can respond right away to protect the productivity of your business. When you read this article, you will find out about the signs that your commercial deep fryer should be repaired.

Over time, they can develop issues and make sure to read on to know what they are.

Thermopile is Broken

It is true that the deep fryer thermopile is among the most important components. This is a heating element and it works to convert thermal heat to electric energy. In commercial kitchens, deep fryers are normally used excessively. This causes thermopile issues. You would need to find out if there is a broken thermopile and you can do that when you check the light. In case it turns on, it will show that the issue is a broken thermopile.

Pilot Light is Faulty

The pilot light is an important part of the deep fryer because it ignites gas that is used for heating oil. This will save your employees the trouble of manually lighting the burners. When you have a faulty pilot light, the deep fryer is unable to start, which delays your operations.

Before you call the professionals, you need to confirm that the hose between the gas line and pilot light is in excellent condition. If the connection is secure, and the pilot light is still malfunctioning, you need professional repair already.

Blocked Burners

The food particles, grease buildup, debris, and dust can clog the burner orifices. Burners that are unable to light up partially or irregularly might block the orifices.

In order to unblock the clogged burners, you must use a stiff brush on the burners to get rid of the particles or debris, which can jam the orifices. In case the burners are still producing fluctuating flames after brushing them, the problem could be inconsistent or low gas pressure. If there is enough fuel supply, the damaged fuel lines might be the reason why the fryer burners are not igniting.

You should not try to fix the fuel lines without a professional. You should ask a professional repair service to do it for you.

Oil Filter is Broken

Normally, deep fryers collect plenty of food debris, which affects the quality of their food. Fortunately, the oil filter can get rid of this debris so the oil is kept clean. This will allow the oil to circulate inside the equipment without any difficulties.

When there is damage to the filter, your oil will become dirty, and it can effectively circulate. This will not cook food well. The employees are going to have difficulty in preparing recipes. You must get experts to change the oil filter early to prevent this outcome.

The Temperature is Uncontrollable

This is a serious issue. If you want to cook food perfectly, the fryer oil should have a suitable or recommended temperature. If the temperature is low, the food will not cook through, and it will burn if the temperature is too high. The issue could be because of poor thermostat calibration. The wire might have problems as well.

You need to contact commercial appliances repair VA if you need to have your deep fryer fixed because you should not be doing that on your own.



How to Clean a Commercial Steamer

Since anything that goes into the steamer can penetrate food, impacts waste, and can harm your patrons, it is important to avoid using toxic or harsh chemicals. Using bath soap and water can offer a gentle and effective method for machine cleaning.

One of the main aspects of cleaning a steamer is by being thorough, but sometimes it requires a commercial steamer repair.

Today, sanitation and food handling are very important. That is the reason why commercial steamers are becoming more common in kitchens. Aside from helping you to make cleaner and healthier meals, they are very easy to use. The good thing is that their maintenance is also easy. You can read on to know more.

Avoid Using Harsh Chemicals

When you clean the steamer, do not use harsh chemicals to clean it. The reason for this is that anything you use for cleaning can go into the food you are heating up and then sell it to customers.

Instead of using harsh chemicals for cleaning, you can use a combination of soap and water. That means there is no need to purchase expensive cleaners.

Empty it First

When you have completed steaming and you already served vegetables, you should take out all the remaining pieces of vegetables from the steamer. If you have an electric one, you should unplug it and allow it to completely cool down. You should remove all the remaining water by using the reservoir and drip tray. Any water that is left in the water box can be carefully removed and then turn the cooled appliance upside down and put over the sink.

Check for Anything Odd

Since one of your business investments is your commercial steamer, you must not leave things to chance. When you already have to clean your steamer, you should pick a time to inspect if everything is working fine and in its right place. Clean water should be used, and then check the filters and seals to see if they are also fine. Any kind of impurity or steamer damage can be transferred to your food and can make it inedible.

Hard Water Areas

In case the plumbing system has hard water, it can quickly build up on the element that heats up the electric steamer. The accumulation of hard water scale causes the steamer to shut off. You should regularly check the element. If you see any scale build-up. pour 3 cups of white vinegar in the reservoir of the steamer. Then, add water until you fill-up the reservoir. Make sure to turn on the steamer and let it heat up for 20 minutes. You can then unplug the commercial steamer and let it cool. Then, rinse the reservoir using cold water.

Check All the Seals

You already know that commercial steamers have seals that should be working properly, which is why you need to check the seals and see if there are cracks. The cracks in the seals ruin your entire steamer. If you do not pay attention to see any cracks, your steamer can become out of order and can cause an emergency.

Dry it Up

After you have cleaned the steamer, you can use a dish towel to wipe dry any remaining moisture. You can store the cleaner in the cleaner until you want to use it again. Dry all the parts of the electric steamer using the towel. Make sure that everything is dry and no moisture is left.

In case your steamer malfunctions, contact commercial appliances repair Virginia to get the maintenance you need without any regrets.



Signs Your Dryer Needs a Repair

The majority of people never think about their dryer until it starts to malfunction, but after that path, it can worsen the issue. Catching maintenance issues and hiring a repair team during the first sight of trouble saves time and money over a long period of time. When you know the signs to look for if your dryer needs a commercial appliances repair, you can prevent any problems from progressing and you might be able to save money on your electricity bill.

Even if a lot of things could go wrong, there are some more common issues. Over time, your dryer will break down and the same thing happens to all your other appliances.

You might have ignored your dryer for a long time, but you should be aware of the signs.

Long Drying Times

Most of the time, one indicator that homeowners will notice is that something is wrong when the dryer starts to take longer than usual to dry clothes. This is an indication that you would want to have your dryer inspected professionally before failing together. You might have to wait 10 more minutes for the cycle to finish, but it might take longer if you will not solve problems right away.

The Drum is Not Turning

If the dryer refuses to turn, the dryer engages when it turns on, you are most likely facing a belt issue. There is an extremely simple and small belt that is responsible for keeping the tension that keeps the drum moving, so if it gets worn or damaged it can stop it from rotating.

There is a Burning Smell

If you notice a burning smell from the dryer, it is a warning that you cannot afford to ignore it if you care about safety. The odor could lead to the lint basket needing replacement, but that is not always the case. You will also notice a burning smell if the dryer is jammed or broken, which prevents hot air from getting out.

You must contact a professional appliance service if you are unable to detect and fix the problem where the burning smell is coming from. Even if it can be a sign of minor trouble, the smell could also come from fire risk. An expert that cares can find the issue and control it without harming your home.

Dryer Does Not Want to Start

The common cause of why a dryer will not start is that the door sensor is failing or broken. Safety measures on the doors are installed in all systems. If this gets damaged, it will say that the dryer door is not closed, and this prevents your dryer from operating normally. The sensor is normally found on the bottom of the front door. It will be connected to a wiring.

Grinding or Spinning

The loud metal grinding or squealing noises indicates that the motor bearings have a problem. This has to be handled by professionals, and it should be fixed right away. Damaged bearings can quickly lead to a total breakdown, and it can cause more damages if you do not fix it soon.

Professional Help

If you notice any of these warning signs or have other reasons to believe that your dryer was not repaired properly, you must reach out to them right away. You can also contact another company if you do not trust the previous one that repaired your dryer. You will not have a hard time booking another one, but make sure to check on them thoroughly.

You can talk to a commercial kitchen appliance repair Virginia to get your dryer fixed because they can also do that for you.