Why Your Appliances Keep Tripping the Breaker

Circuit breakers can protect you against electrical hazards like fire or electrocution and it is going to shut down the power supply. They will trip when there are faults detected which causes these risks. There are a couple of circuit breakers that are located on the electrical panel of the home that can be divided into several sections that control different areas in which electricity is supplied.

When there is a circuit breaker that exceeds safety restrictions, the breaker is going to trip resulting in loss of power to certain appliances like the fridge or microwave. Figuring out why this happens can also be handled by a walk in cooler repair in case you do not know what to do. Read on to learn more.

Overheating Appliance

When the appliance overheats, it can cause the breaker to trip. The main potential cause of overheating appliances is a user error, like an overloaded ice freezer. You should consider the main appliances on the circuit that you are having a hard time with. is the appliance being used more frequently lately? Does your appliance get very hot when you use it?

In case you have been using the appliance correctly, it might be overheating for a different reason. For instance, a vent is blocked, there is a worn-out component, or there is an electrical short hidden somewhere.

Damaged Cable or Plug

Maybe the most common cause of an appliance that causes a breaker to trip is a faulty cable or plug. This happens because the cable has somehow been damaged like it might be the case after something heavy is dropped on it. In case you have small pets that have permission to roam around your house, check if they have not been chewing your cable.

The plug can be damaged after being pulled or knocked violently from the wall. A common cause of this type of damage is from someone who violently trips over the cable and violently yanks the plug from your socket.

Overloads

The most familiar reason for the breaker to be tripping is circuit overloading. This occurs when there is too much equipment loaded on the breaker and has surpassed the power supply safety limit. Most of the time, you are going to see this happening when you install a new appliance. The electrical system cannot maintain it or when a high-power device is plugged in where there is lacking entry to save amperage.

Faulty Appliance

Appliances sometimes just go faulty. It can be because of physical trauma, wear, and tear, or because it was poorly made. No matter what the reason is, this can be identified by trying the appliance on various electrical circuits. This way, you can see if it trips the breaker as well, or if you disconnect everything so the potentially faulty appliance is the only thing that is connected.

If you have a faulty appliance, the next action you will do depends on what you prefer. If your appliance is like a cheap radio, you might want to throw it away. If the appliance is expensive, or it is of intrinsic value, you might want to call for professional repair. No matter what your decision is, you should not plug it back in while there is a fault.

Check the Fuse Box or Trip Switch

The switch should always be on, but it if trips repeatedly, there might be a problem with the fuse box or switch. You must call an electrician right away.

You can contact commercial ice maker repair Alexandria to check on your appliances to make sure nothing trips.

Share this story!

Leave us a Comment