28

Mar

Factors that Cause the Refrigerator Compressor to Overheat

The role of the refrigerator is to keep your food cold, but when the compressor is hot, it defeats the purpose. A refrigerator is like an engine. It comes with parts that should work together so that it runs smoothly. If a part of the refrigerator does not work properly, it can cause problems with other parts. The same goes for a compressor.

When your refrigerator compressor starts to overheat, the appliance turns into a ticking time bomb. It poses a fire risk, but if it is in this state, it consumes more energy than usual, which results in higher utility bills. You can call commercial refrigerator services if the issue worsens. Learn more about it now.

Low Internal Temperature

One common household mistake is to set the temperature of your refrigerator too low. When you set the temperature lower compared to what is recommended, it can cause the compressor to overheat and fail. This can cost you time and money. Setting the refrigerator temperature lower compared to 35 degrees F, the compressor is going to work harder, making it overheat quickly.

Modern refrigerators overheat if you do not correctly set the temperatures outside. If you prevent the refrigerator from overheating, you need to check the temperature setting on the control panel and make sure to set it between 37 to 38 degrees F.

Poor Ventilation

Fridges release hot air while it keeps the inside compartments cool. Actually, condenser coils are good at getting rid of hot air that has been generated while compressors and other components are functioning. However, if hot air is unable to escape, the compressor will overheat naturally, leading to performance issues.

Hot air from coils can become obstructed when you have objects close to your fridge. Therefore, make sure to keep the space at the back of your fridge so the hot air can escape properly.

The Fridge is on the Sunny Side

Sometimes, refrigerators are placed in a location that has too much sunlight.

This kind of placement causes you to see a fridge that overheats under hot weather. If this happens, there are two reasons why your compressor is hot.

The sunlight could directly heat the compressor. Or, since direct sunlight is heating the fridge, the compressor should work harder so it cools down.

Not Enough Refrigerant

If the refrigerator is running loudly or is working harder than normal, the culprit is low-level refrigerant. This is a common problem in older refrigerators and can cause different problems.

The main cooling system of a refrigerator utilizes refrigerant to circulate around a closed loop. The refrigerant receives pressure from the compressor and it circulates through the closed loop. When this happens, your refrigerator stays cool.

There needs to be enough refrigerant in the system. When your system is undercharged or too hot, it can cause problems.

Condenser Fan is Broken

The condenser in your fridge will eliminate heat that is generated by components. Naturally, if the fan broke down, the appliance’s internal temperature substantially rises which leads to overheating of not only the compressor but all other components as well. Therefore, when this happens, it is natural for the compressor to fail. If there are expert technicians that can repair the fridge, you will not have an issue.

The condenser fan will be replaced after inspecting the damages that were done to the compressor. If the damage is not very serious, they are going to repair them to make the fridge functional again.

You can contact ice cream freezer repair Springfield anytime you need the compressor to be fixed.

21

Mar

Freezer is Working but Not the Fridge

There is nothing more frustrating for a homeowner than when the freezer is working but the fridge is not. It is worthing reasoning out that if the freezer is cold, the refrigerator should be as well. However, sometimes it is not happening.

When it comes to refrigerators and freezers, they both have a couple of complex mechanical parts and electric components as well. A couple of reasons why your fridge is not cooling but the freezer works can easily be solved by any homeowner. There are a couple of issues however that are left for professional technicians to do.

Before calling the walk in cooler repair, you should read this article.

The Thermistor is Failing

One common reason why the refrigerator is not cooling is because of a faulty thermistor. The thermistor is going to monitor your refrigerator’s internal temperature. When the interior is detected to be excessively warm, it will signal the compressor to activate and begin cooling.

In case the thermistor refuses to work, the appliance cannot monitor its own temperature, so the coils and fan will never switch on, in case the temperature increases, or they will never switch off. If the fridge is going to be very noisy, and if it will ice up or freeze your food.

You Could be Overpacking Your Freezer

One common issue that homeowners are unaware of is a freezer that is overpacked. Most homeowners feel that it stands to reason that if the freezer has no room, you just shove it in there.

The problem with doing this is that the freezer will contain vents that allow cold air to flow. In case these vents are blocked by too many items, that will limit the airflow that goes in your refrigerator. For instance, the freezer would be okay but the refrigerator is too warm.

Stuck Damper Control

One reason why this problem could be happening is that the damper control assembly is stuck. The damper control assembly is found between the freezer and fridge components. It regulates how much cool air is flowing from one compartment to another. If the damper control is stuck closed, it will not let enough cold air into the fridge, which causes the temperature to go inside to rise. If you want to fix this issue, place your hand in front of the vent to check for airflow. If you do not feel an airflow, you might have to call a professional to repair the damper.

Evaporator Fan is Faulty

The evaporator fan is responsible for pulling cold into the coils, where it is distributed using the fridge and freezer. In case the fan is malfunctioning, this does not happen efficiently. The most common issue with the fan is the motor.

Most of the time, a faulty evaporator fan is because of inefficiencies or faults in other parts of the appliance. During these circumstances, the evaporator fan motor should work harder to compensate, which increases the likelihood of breaking down and shortening the lifespan.

Condenser Coil is Dirty

In general, you can find condenser coils at the back or bottom of the fridge. You should consult the owner’s manual to make sure. After locating them, you can check to see if your condenser coils are dirty. If this happens, you need to unplug the refrigerator and use a small attachment to clear them. After that, use a coil cleaning solution and water for cleaning. You need to dry the coils using a clean cloth and then plug the fridge again.

You can call commercial refrigerator repairs Alexandria anytime to get it fixed.

 

 

15

Mar

How to Pick an Appliance Repair Company

When your commercial oven, refrigerator, or deep fryer breaks down, it is important to find a trustworthy commercial appliances repair. You do not want to go through this stressful situation for so long, but the right provider makes a huge difference. If you have the diligence, you can locate a qualified technician. A refrigerator is able to maintain the right temperature for four hours, and the freezer is maintained for up to 2 days. That is going to buy you some time.

It is important to find a well-related specialized company when it comes to servicing your kind of appliance, and that comes with a certain reputation for providing good repairs at fair costs. Learn more now.

Do Proper Research

It is imperative to research so you can make sure the company you hire is legitimate. You can check a few websites and check the services they offer and the reviews.

Most of the repair companies are going to require a service call fee so they can diagnose your appliance. However, full payment is not needed until you have a complete service. If the part required to fix the appliance is a special order, a company might need the payment for that part only.

Confirm Their Credibility

Even if it seems apparent, it is important to confirm the appliance repair show or the professionals have the credentials they need and authorization to operate. You do not want to risk allowing someone to work on the appliance that you probably spent a lot for without any training.

Aside from that, since that person enters your home, you need to verify the company that employs them took all the important precautions before deciding. Their precautions will guarantee that the company will take full responsibility if they do something wrong.

Experience Level and Qualifications

Other crucial elements to consider when choosing an appliance repair company is their qualification and experience. You need to examine how many years a company has been operational and make sure they only recruit personnel who are well-trained. You need to be confident that the technician can understand what they are working with according to their experience. They might have dealt with a scenario with some clients. In addition, they know the critical regions that need replacement and repairs. They could also suggest that you need to have your appliance fixed if they cannot do it.

They Need to Have Insurance Coverage

You can also review policies to see if they give warranties and insurance in case of any damage. it is an awesome idea to protect you from mishaps that may happen during the repair process. However, these are uncommon because a technician cannot damage your appliances intentionally. You need to do background checks to make sure you have enough coverage.

Warranty

Another important consideration before you hire an appliance repair service is they should have a warranty. Ask if the company provides a warranty for the repair services before they employ an appliance repair technician.

In addition, you need to make sure that they adhere to the requirements of their warranty. If this is not the case, you can end up having to pay extra for any repairs. You should never decide anything unless you are sure about it.

Cost

Ask how they calculate fees, which includes their charges for parts and labor. Also, an on-site diagnosis by a technician with common replacement parts saves you time and cost. The price quotes and estimates give you predictability.

You can contact commercial ice maker repair Fairfax anytime.

28

Feb

How to Maintain a Gas Oven

Most people who have a gas stove do not choose to purchase that stove. Most establishments like to use gas stoves, and they are also popular in households. Kitchen ranges can give you faster heat with great control, and their life span is longer compared to electric ranges. If you own a gas range, you should maintain it well. Appliances that are reliant on gas can lead to major safety hazards if they are not maintained properly. In addition, a commercial gas oven repair should be called as part of the maintenance.

It could be that you did not want a gas stove, but you own one now. This might be the best thing that ever happened to you if you like the open flame in your kitchen.

Wipe it Down Weekly and Deep Clean it Monthly

Probably, you are already aware of the basics of keeping your stove clean. Every day, you have to wait until it is cool and use a mild cleaning solution to wipe it down. If there are drips or spills, you should try wiping them up right away, once it is safe. This common approach prevents some of the biggest messes and lessens how much scrubbing is needed later.

Regularly Inspect and Clean the Burner Channels

The burner channels move the gas from the supply to the burner rings that supply your pots and pans using heat. Burner channels are found under the gas cap and they can become clogged over time. When this is happening, the burners will not supply an even heat distribution, which can negatively affect your cooking. Blocked burner channels are fire hazards as well.

In order to clean the burner channels, you can use a straw or pipe cleaner. You can avoid using a toothpick or something else that has flammable materials.

Check for Gas Leaks

You can start by checking the stove’s gas line from time to time. Tiny leaks or occasional leaks can be dangerous. The quickest way to check is a gas leak detector substance. This is a thin goo that can spread over a gas line connector. If the goo bubbles, there is a gas leak. You can give the gas line a nudge in order to make sure that the small movements of the stove or bumps in the kitchen will not cause any leaks.

If you see that the gas line is secure, you can turn on your stove.

Clean the Stove Grate

A lot of gas stoves have an enameled grate that is used to cover the stovetop. Some of the grates are smaller. Grates are able to collect spillages and oil, so you should scrub them once a week. For 30 minutes, you can soak the grates in soapy and warm water. After that, you can use a sponge or scrubber for the remaining debris. Allow the stove grates to completely dry before you put them back on the stovetop.

Never Pour Water on the Stove

You might be tempted to try soaking the lower areas of the gas stove to easily clean them. You should not do that. You should never pour water on the gas cooktop because you can get into burners, and gas lines, and cause electrical problems. The truth is, you should not pour on the electric stoves as well, but you would be shocked by how many people want to achieve a clean stove faster. If you are looking for a flowing scrubbing agent, you can try using salt which is easily available in the kitchen.

You can contact deep fryer repair Northern VA anytime for better gas oven maintenance.

22

Feb

Why Your Appliances Keep Tripping the Breaker

Circuit breakers can protect you against electrical hazards like fire or electrocution and it is going to shut down the power supply. They will trip when there are faults detected which causes these risks. There are a couple of circuit breakers that are located on the electrical panel of the home that can be divided into several sections that control different areas in which electricity is supplied.

When there is a circuit breaker that exceeds safety restrictions, the breaker is going to trip resulting in loss of power to certain appliances like the fridge or microwave. Figuring out why this happens can also be handled by a walk in cooler repair in case you do not know what to do. Read on to learn more.

Overheating Appliance

When the appliance overheats, it can cause the breaker to trip. The main potential cause of overheating appliances is a user error, like an overloaded ice freezer. You should consider the main appliances on the circuit that you are having a hard time with. is the appliance being used more frequently lately? Does your appliance get very hot when you use it?

In case you have been using the appliance correctly, it might be overheating for a different reason. For instance, a vent is blocked, there is a worn-out component, or there is an electrical short hidden somewhere.

Damaged Cable or Plug

Maybe the most common cause of an appliance that causes a breaker to trip is a faulty cable or plug. This happens because the cable has somehow been damaged like it might be the case after something heavy is dropped on it. In case you have small pets that have permission to roam around your house, check if they have not been chewing your cable.

The plug can be damaged after being pulled or knocked violently from the wall. A common cause of this type of damage is from someone who violently trips over the cable and violently yanks the plug from your socket.

Overloads

The most familiar reason for the breaker to be tripping is circuit overloading. This occurs when there is too much equipment loaded on the breaker and has surpassed the power supply safety limit. Most of the time, you are going to see this happening when you install a new appliance. The electrical system cannot maintain it or when a high-power device is plugged in where there is lacking entry to save amperage.

Faulty Appliance

Appliances sometimes just go faulty. It can be because of physical trauma, wear, and tear, or because it was poorly made. No matter what the reason is, this can be identified by trying the appliance on various electrical circuits. This way, you can see if it trips the breaker as well, or if you disconnect everything so the potentially faulty appliance is the only thing that is connected.

If you have a faulty appliance, the next action you will do depends on what you prefer. If your appliance is like a cheap radio, you might want to throw it away. If the appliance is expensive, or it is of intrinsic value, you might want to call for professional repair. No matter what your decision is, you should not plug it back in while there is a fault.

Check the Fuse Box or Trip Switch

The switch should always be on, but it if trips repeatedly, there might be a problem with the fuse box or switch. You must call an electrician right away.

You can contact commercial ice maker repair Alexandria to check on your appliances to make sure nothing trips.

15

Feb

Signs Your Deep Fryer Needs to be Replaced

Deep fryers are stapled in the majority of commercial kitchens, but there can malfunction from time to time. That is why it is significant to understand some common problems you could encounter when you own even the highest quality deep fryers. Even if most commercial deep fryers are popular for their efficiency and durability, these kitchen appliances are heavy-duty. They can come across a couple of minor issues within their lifespan. Luckily, the common issues that come with a deep fryer repair can easily be fixed and maintained without spending too much.

You can contact commercial appliances repair anytime if you want to try repairing your deep fryer first before buying.

Thermostat is Broken

Deep fryer manufacturers include a thermostat so you can control the equipment’s operating heat. Therefore, the oil temperature cannot lower or raise excessively. When there is a broken thermostat, your deep fryer cannot adjust the heating element properly. The oil can be too cold or too hot, which causes food to burn or undercook.

A deep fryer that overheats can burn oil to combustion, which leads to a fire outbreak. Therefore, if employees inform you about a broken thermostat or problems with the oil temperature, you should contact professionals to immediately service your machines. The specialist is going to change the thermostat and test the equipment to tell if there is an underlying issue.

Burners are Blocked

Grease buildup, dust, food particles, and debris clogs burner orifices. Burners that refuse to light up at all or only partially or irregularly could have blocked orifices.

In order to unblock clogged burners, you should use a stiff brush over the burners to take out particles or debris that are jamming the orifices. In case the burners produce fluctuating flames after brushing them, the problem could be because of inconsistent or low gas pressure. If the fuel supply is enough, damaged fuel lines could be the reason why fryer burners refuse to ignite.

You should not try to fix fuel lines on your own. You should ask the technician to assess the fryer for potential problems with the supply lines of the fuel.

Faulty Pilot Light

When there is no pilot light, it is normally a sign that the deep fryer is totally out of commission. If you do not have it, the oil is not going to heat up at the right temperature. Even if there are a lot of reasons that could cause a faulty pilot light, the common culprit is the gas supply valve. The best way to confirm that this is the issue is to examine supply lines for any blockage. In case the valve is clog-free and open, it might be time to replace the thermopile. The main heating element is the thermopile, which converts thermal heat into electric energy, and signals the pilot light to ignite the flame. Even if the thermopile is quite easy to replace, you should contact a professional to make sure that the repair is done correctly.

Oil Filter is Broken

Normally, deep fryers collect plenty of food debris, which affects food quality. The good thing is that they have an oil filter that takes out the debris to keep the oil clean. This will allow oil to circulate in the equipment with no difficulties.

When there is a damaged oil filter, the oil is going to be dirty, and it cannot effectively circulate. This is going to result in food not cooking well.

You can check commercial dishwasher repairs Fairfax anytime you need to because you need professionals fix your equipment.  

 

31

Jan

Benefits of Using a Commercial Steamer

There are more commercial chefs today who are embracing multi-modal cooking. The general cooking philosophy will emphasize using different processes, whether it is baking, roasting, frying, or smoking. What would be better is that when you invest in a commercial steamer, you can do all of these.

Steam cooking is one of the healthiest ways of preparing food, and you can contact a commercial steamer repair in case you need a repair. When you research it, there are so many people who love to use food steamers because they are convenient. In addition, it saves you a lot of preparation time in your kitchen and it offers plenty of healthy benefits. Read on to learn more.

Healthier Cooking and Lower Cholesterol

Do you want to indulge in the foods you love to eat while making sure that you are not too fatty or greasy? You might think this is difficult, but it is totally possible using a food steamer.

Steam cooking is a very healthy way of cooking your food like meat and vegetables. A food steamer does not require grease to cook food, which means anything you make using this appliance is made with less fat.

In addition, steaming food helps in preserving all food nutrients while you include vitamins, fiber, and minerals.

Better Multi-tasking

When you cook foods using dry heat, food moisture gets released into the air together with things like flavors and aromas. Most of the time, these flavors get transferred to other items inside the oven. In order to avoid unwanted transfer, chefs need to cook food during their shifts, while taking time to cook other items as well.

Steam cooking prevents this unwanted event. Instead, the aromas and flavors will stay locked inside the foods themselves. This increases the resulting taste of food, but it will allow you to cook different food items all at the same time. By using steam cooking, kitchen managers are able to boost throughput when they maximize the open spaces.

Quick Cooking

Cooking with steam is a quick process and are you even able to cut your cooking time in half for those products that normally take a lot longer to cook? Are you aware that you can cook a cheesecake or cake inside your steamer? There are a lot of different commercial steamers that are excellent in a commercial kitchen.

Keeps the Food Color

What a lot of people love about food steamers is that they are able to keep the natural colors of food, especially when it comes to vegetables. That is because they only steam dishes unlike using the stove or heat which makes vegetables lose fresh colors.

Less Mess

Apart from the convenience when you use it, food steamers can be easy to clean as well. There is no need to worry about oils and sticky sauces that are splattering to wash after cooking food because the steamer trays are safe and can be hand washed.

Even and Gentle Cooking

Some people assume that steam cooking will leave food soggy and wet. This cannot be further from what is true. The truth is, after the steam already passed the heat on food, the leftover steam has been recaptured and removed from their system. Foods remain to be perfectly moist, but they are never wet.

More importantly, steam cooking will ensure that foods will never become dry, and it commonly happens with other cooking methods. The difference has something to do with how heat flows through your oven.

You can contact commercial kitchen appliance repair Springfield anytime if you need something fixed.

 

26

Jan

How to Clean a Dirty Kitchen Worktop

You always want your kitchen worktop to look spik and span, and learning how to clean it does not have to be hard. However, prior to digging out the cleaning products you love, you should know how you can do it right. Your approach is going to mainly depend on the kind of worktop you have. This kind of hardware can be made using different materials, which can be laminate, granite, wood, and marble. Each one needs a totally different cleaning method.

If you just contact commercial dishwasher repairs, you can ask them how to clean a kitchen worktop, but it also helps if you know what to do. Let this article help you so read on.

Immediately Clean Spills and Do Not Just Wipe Them

Wiping up the orange juice spill using a kitchen roll will not get rid of everything from the worktop surface. Wiping it up using warm water and soap is going to clean it but it will not totally eliminate it at the same time.

The tiny liquid and food particles are going to linger on the worktops and bacteria will start to grow here. Cleaning will remove the dirt, grease, and bacteria but disinfection kills them on contact.

Use Vinegar and Baking Soda to Clean Stove Burners

Once you have made an all-natural cleaner, you can start cleaning. You can start to apply the paste that you made onto your cooktop. After that, spray the vinegar solution over the paste. The vinegar and baking soda are going to act together to create bubbles that help break down caked-on grime.

Allow the paste to sit for a couple of minutes. Then, wipe it away using a damp cloth. All the grease, dirt, and grime will come off easily without scrubbing it.

Removing Kitchen Stains

Aside from cleaning daily, you would sometimes have to tackle stains on kitchen working surfaces. A lot of kitchen cleaners are hard enough to get rid of stains, but there are a couple of handy tricks that can help remove those stubborn marks.

Regularly Disinfect Sponges

Everyone knows that dishcloths and sponges have billions of bacteria so you really do not want to spread those on your worktops when you try to disinfect them.

The solution to this is that you should clean them properly after using and drying them thoroughly. Therefore, they can be safely reused and you just have to replace them every few weeks.

You can disinfect dishcloths and sponges using a bleach solution.

Clean Gas Range Stove Top Naturally

Cleaning a gas range stovetop is almost the same process as a glass top. You can start to make the paste and then apply it, then use vinegar to spray. Allow it to sit and allow the bubbles to do the work. After that, use a soft cloth or an old toothbrush if necessary.

Then, rinse it with warm water and dry it using a soft cloth. You should be careful not to get moisture in the igniters or electrical controls while you do this because it can cause your range to not start or click but no light. The stovetop must be left looking shiny and new even if you do not scrub or use harsh chemicals just to get rid of the dirt and stain. Sometimes, you might need to exert more effort than usual, but these solutions will normally work. You can also check the solution you made if the proportions are correct.

You can contact commercial refrigerator services Northern VA anytime if you need the best appliance repair.

09

Jan

Advantages of Steam Ovens

If you are thinking of buying a steam oven, you might be surprised to find out that it costs an average of $4000. Before you decide to examine the advantages of buying a steam oven, you should also know a good commercial oven repair in case you will need them in the future. A lot of research has been done to help you decide a lot faster.

Prior to deciding, you would want to read more about why you should invest in one. Maybe a fellow business owner mentioned it to you and now you want one. There are many reasons in this article that you should read about so that you can determine if you can use it for your business or not.

You Can Cook a Lot of Things

Originally, steam ovens were only for steaming vegetables. However, this is not the case anymore. A top-quality one will allow the chicken and fish to cook at a temperature of 100 degrees C. The supplies have been experimented with and cooked using sponges in steam ovens. They are useful for different functions, which include:

Dough proving

Food reheat

Blanching

Hard-boiled eggs

Defrosting

Sterilizing bottles

Skinning tomatoes and sous vide

Healthy Cooking

Steam ovens will reduce the absence of food nutrients. This is because steam ovens use steam to cook food instead of hot air. Steaming your food has the tendency to keep nutrients and vitamins locked.

Hot air will significantly lessen nutrients in food because you are at risk of overcooking the food which can destroy the nutrients. In addition, steaming does not need boiling foods in water. You will see that when you boil vegetables and other foods, it could cause the nutrients and vitamins to seep into the water.

Gives You More Humidity and Moisture

A steam oven does not change the cooking time, and it only gives you the same temperature with added moisture and humidity while something bakes or roasts. Equipping the kitchen with a steam oven is among the most important things you can do in order to boost your cooking skills. It is a great way to keep up with the cooking experts. However, those who are not techy would love to know that ovens equipped with steam offer the best method for reheating leftovers. It is because steam harnesses moisture from what was lost inside your fridge, so the pizza of yesterday tastes good the night before. Your microwave is only good for reheating coffee all day when you work from home.

Evenly Warms Food Without Drying

Steam is helpful if you want to heat leftover food so that it can retain moisture and flavor, unlike microwave-heated foods. The steam provides more moisture retention, so your food will be juicier when you use it to reheat.

Healthier Cooking

Cooking with steam is very healthy because it does not need oils. It is also the secret of the best bakeries and Michelin-star restaurants because steam convection cooks evenly compared to other methods. At the same time, it produces perfect tender roasts, and moist fish with a flaky outside, as well as fluffy baked goods. The simplicity it offers is even better.

You Can Cook Food Simultaneously

Different foods can be simultaneously cooked using a steam oven. In addition, the steam design will not transfer the flavors or taste between foods. This way, you can cut cooking time if you are preparing a few dishes all at the same time. You will not be as pressured if you have many customers.

You can contact commercial appliances repair Fairfax in case you want to have your steam oven checked.

28

Dec

Most Common Issues of Appliances

Appliance issues can happen to just anyone, most of the time when you least expect it. Regardless if you are faced with an aging appliance, one that will not turn on, or you do not know who can fix it, they can happen.

Everyone has seen every kind of appliance issue they can think of, and everyone knows how frustrating it is. That is the reason why this guide was created about the most common friction points that are faced by customers. You can always contact a commercial oven repair service, but it helps to know what kind of issue you are dealing with. You can gain more knowledge about those issues by reading further:

The Refrigerator is Not Cooling

This is among the most common issues that commercial kitchens sometimes have to face and it is crucial that a repair team comes right away. When the fridge will not keep a cold temperature it can spoil food and waste money, which is something you do not want to happen. A way to keep the appliance running efficiently is to clean the coils twice a year. This is simple maintenance that can be done right away.

The Dishwasher Will Not Drain

The standing water that is found at the bottom of the dishwasher is not what you are seeing. At the end of the wash cycle, the dirty water must drain through a connection beneath the sink. If you are there, there can be an issue that you must invest in.

Before you give appliance service specialists a call, it is recommended that you run your garbage disposal in case you have one.

There is Water Pooling in the Dishwasher

A dishwasher that refuses to drain can be very frustrating. The issue can be linked to errors of users such as not cleaning the filter or forgetting to empty the drain basket. In case these get blocked with food scraps or detergent, they can lead to water flooding, so they should be cleaned regularly.

Evaporator Fan Issue

The evaporator fan might be the one to blame if your fridge starts freezing up and collecting ice. It can be a case of the entire fan not working or it is only part of the coil. This might be because of a low charge. You would want to hire a certified technician to come and check the issue because you will not be able to check on that yourself.

Gas Range Refuses to Light or Heat Up

Many homeowners have electric gas ranges, but for the ones who cook using gas variety, there are instances when the burner or oven refuses to heat up. They might also have a hard time lighting up which complicates cooking even more.

The lighting might not be turning on because the gas line got closed, and the gas is unlit or running freely which is dangerous. It could also be that the pilot light is not on. The electrodes in the spark igniter are already loose, or the burner caps are closed.

No matter what is causing it, you should ask professionals to check on it.

You Hear Strange Noises

When you can hear that your refrigerator is making loud sounds that are unfamiliar to you, it could be a sign of trouble. Problems with motors, fans, or other parts might trigger sounds you can hear. Contacting commercial refrigeration repair is your best option because you can be sure that the issue will be properly diagnosed.

You can contact commercial steamer repair Fairfax if you are experiencing any of the said issues with your commercial appliances